As the footstep of winter comes, installed the day that the family of terrestrial heat floor looks forward to most eagerly also arrived! In fact, it is a blessing to be able to step on the warm ground with bare feet in winter.
If you have the following question? Keep reading.
1. the first use of geothermal floor there is doubt?
2. How to use geothermal floor properly to improve its service life?
3. How to choose a good geothermal floor?
The initial use of geothermal heating should be gradual
When using floor of terrestrial heat, consumer must notice ground of step by step gives floor heating. The first time geothermal heating is used, note that it should be slowly warmed up. When used for the first time, the first three days of heating should be gradually heated up: the water temperature of the first day 18℃, the second day 25℃, the third day 30℃, the fourth day can rise to normal temperature, namely the water temperature of 45℃, the surface temperature of 28℃ ~ 30℃. Cannot heat up too fast, too fast word, the floor may produce craze to twist phenomenon because of expansion.
When the geothermal heating system is used again after a long time out of service, it should be heated in strict accordance with the heating procedure as it was used for the first time.
The surface temperature of the geothermal floor should not be too high
It should be noted that the use of geothermal heating, the surface temperature should not exceed 28℃, water pipe temperature can not exceed 45℃, if more than this temperature, will affect the service life of the floor and service cycle. General family, winter room temperature achieves 22℃ or so, had been very comfortable, the word that raises temperature normally, won’t affect the use of floor of geothermal heat.
The placement of furniture can also affect heat dissipation
Do not put legless furniture on geothermal floor as far as possible, also had better not put the household that needs to be fixed in the ground to act the role of article. As a result of indoor heat conduction by the ground whole indoor, so if large area blocks heat dissipating face, easy to cause indoor heat is not free, heat is excessively concentrated and cause the floor to be heated unevenly, easy to cause the floor to appear here to be out of shape and so on, waste heat energy, make the bedroom temperature drops.
Turn off the geothermal system and note that cooling should be gradual
As the season goes by, when the weather is warm, when indoor no longer needs geothermal system to heat the house, should notice to close geothermal system to also want to have a process, the cooling process of the floor also wants step by step, cannot sudden drop, if the cooling speed is too fast, also can affect the service life of the floor.
Consider humidifying when the room is too dry
Winter climate is dry, add use geothermal heating, the floor is in the case of high temperature for a long time, easy dry crack, at this moment owner is necessary to add humidity to the room, let indoor air humidity maintain in 45%-75%, lest the floor is dry crack out of shape.
How to choose a good geothermal floor?
- From moisture content and paint to see the rigor of the process
The moisture content of the floor decided the stability of its in geothermy environment to a great extent. The special research group of Fudeli geothermal carried out pavement testing in different harsh environments all over the country, and monitored the expansion change value of the solid wood geothermal floor after installation at the spot, so that the same oak geothermal product could still be “as stable as Mount Tai” in the home of Chinese consumers in different regions under different climatic processes all over the country. At the same time, Fudeli strictly regulates the environmental protection coating on the 6 surfaces of each piece of solid wood floor, placing the wood under the protection of paint to isolate the water vapor from the wood, three-dimensional protection of water invasion, and promote the long-term stability of solid wood floor.
- From the lock and installation to see the stability of the product
Draw lessons from the experience of Chinese traditional woodworking mortise and tenon, adopt dovetail mortise and tenon patent lock technology, rely on the stress stretch after lock, lock tightly, close seam, guide the whole translation after expansion and contraction of solid wood floor, solve the natural malpractice of solid wood floor. At the same time, the floor essentially belongs to semi-finished products, three points of the floor seven points of installation. The standardization of the installation is also the key to the quality of the floor. In Fudeli, a professional team provides one-to-one service from floor sales to installation and after-sales service to ensure the consistency of quality.